Connecting The Refrigerator - Dometic DW6 Instrucciones De Uso

Using the refrigerator
6.2 Setting up the refrigerator
➤ Make sure that the location is able to support the weight of the refrigerator as well as its
maximum load.
➤ Position the refrigerator horizontally.
➤ Open the door of the refrigerator.
➤ Slide the condensation tray at the bottom of the refrigerator into the corresponding holder
(fig. 5, page 3).
➤ Put the interior racks in the refrigerator so that they are on the pre-assembled side rails (fig. 6,
page 4).
➤ Close the door of the refrigerator.
6.3

Connecting the refrigerator

D
DANGER!
Never handle plugs and switches if you have wet hands.
➤ Before starting up the refrigerator for the first time, check whether the operating voltage and
the mains voltage match (see type plate).
Operating with AC power supply (fig. 7, page 4)
➤ Insert the mains adapter into the power supply socket on the back of the refrigerator.
➤ Connect the adapter plug to the socket on the back of the refrigerator.
➤ Connect the mains plug to an AC socket.
Operating with DC power supply (fig. 8, page 5)
➤ Remove the AC mains adapter from the power supply socket on the back of the refrigerator.
➤ Connect the plug of the DC connection cable to the socket on the back of the refrigerator.
➤ Connect the DC connection cable to the DC power supply.
6.4 Using the refrigerator
A
NOTICE!
Food should be stored in its original packaging or in suitable containers.
➤ Press the POWER button for 3 seconds to switch on the refrigerator.
✓ The display (fig. 4 3, page 3) switches on and shows the current cooling temperature.
➤ Press the POWER button again for 3 seconds when you want to switch the refrigerator off.
✓ The display switches off.
➤ Press the LIGHT button for 3 seconds to switch the interior light on or off.
12
DW6
EN