Power Supply Electrical Connection; Figure 4: Connection Of Pump External Capacitors; Figure 5: Electrical Connection To The Supply Line - DAB E.Box Plus Instrucciones De Instalación Y Mantenimiento

The capacitors must be connected as shown in Figure 4. Take care because in the E.Box Plus they share the same
terminal as the pump.

2.3 Power supply electrical connection

Before starting work, disconnect the power from the supply line. Use cables with a suitable size for the
currents involved, considering that the in-line current is the total of the currents on the pumps.
In the case of single-phase power supply use terminals L and N. In the case of three phase power supply use
terminals L1, L2, L3. See Figure 5 Electrical connection to the supply line.
Connect the earth cables of the pumps to the earth terminals in the E.Box panel!
ENGLISH

Figure 4: Connection of pump external capacitors

Figure 5: Electrical connection to the supply line

73