Safety Information; Operating The Appliance - Bosch MUZ6DS Serie Instrucciones De Uso

Ocultar thumbs Ver también para MUZ6DS Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
en
Always follow the operating instructions
for the base unit!
This appliance is designed for processing
normal quantities of food for domestic use and
is not suitable for industrial use.
The accessories are suitable for the food
processor MUM6N... The described optional
accessories are available from specialist
outlets.

Safety Information

The continuous-feed shredder must be
completely assembled before use.
Never assemble the continuous-feed shredder
on the base unit. Always attach completely
assembled.
Before attaching/removing the continuous-feed
shredder, wait until the drive has come to
a standstill and pull out the mains plug.
Operate the continuous-feed shredder
in the indicated operating position only.
Keep fingers clear of the filling shaft and
the outlet opening; add more ingredients
with the pusher. Risk of injury from sharp
cutting discs! Take hold of cutting discs
by the edge only.
Keep children away from the appliance.
Overview
Please fold out the illustrated pages
Fig. A
Pusher (small)
a
Pusher (large)
b
Housing upper section
c
Reversible slicing disc (thick/thin)
d
Reversible shredding disc (coarse/fine)
e
Grating disc (medium-fine)
f
g
Discharge wing
h
Drive coupling
i
Housing lower section with drive shaft
Optional accessory (available from
dealers)
Julienne disc
j
Grating disc coarse
k
Chipper disc
l
Robert Bosch Hausgeräte GmbH

Operating the appliance

Important information
The appliance cannot be operated
with the continuous-feed shredder
until the protective cover is placed
on the blender drive.
Thoroughly clean accessories before
using for the first time, see "Cleaning and
care".
Assembling the continuous-feed
shredder
Figure B
Place discharge wing on the driver
(note fins).
Insert both into housing lower section.
Place required cutting disc on the driver,
turning the correct side face up. Carefully
take hold of discs by the edge!
Attach housing upper section. Close the
attachment bar until it locks into position.
Insert pusher into the filling shaft.
Attach the continuous-feed shredder
and rotate all the way in an anti-clockwise
direction (bayonet lock).
Important information
Both sides of reversible discs can
be used. As far as all other discs are
concerned, the indicated side must
always be face up.
Operating the appliance
Fig. A
5090 471 838 | 01.2008
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Muz6ds3

Tabla de contenido