Operation Pole Hedge Trimmer - IKRA HHTI 40 Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
Packing List:
• Cutter Blade
• Cutter Blade Cover
• Pivoting Power Head
• Telescopic pole
• Operator's manual
Assembly
1. Rotate the knob (1) of the telescopic tube anticlock-
wise ( ) to loosen the tube.
2. Pull up the tube for a short distance.
3. Fix the tube with machine on the black tube
4. Hold the black tube to make sure the head tube is
fixed well on the top of the black tube.
5. Rotate the knob (2) of the head tube clockwise ( ) to
tighten the head part.
6. Draw back the tube
7. Rotate the knob (1) clockwise ( ) to tighten the tel-
escopic tube.

Operation pole hedge trimmer

WARNING: Read and understand this owner's manual
before operating Pole Trimmer. Make certain you read
and understand all Safety Warnings of this manual.
Improper use of this Pole Trimmer can result in severe
injury or death from fire, electric shock, or body contact
with moving parts.
Pivoting the Power Head
The Pole Trimmer is equipped with a power head that
pivots. The power head has a spring-loaded button that
allows it to be locked into several different positions
within its 135-degree rotation. Before connecting the Pole
Trimmer to the electrical supply, make sure the power
head is locked into position. Do this by trying to rotate the
power head in either direction. The power head should
be locked in position and should not rotate. To pivot the
power head, follow the instructions below.
GB-9

Publicidad

Tabla de contenido
loading

Tabla de contenido