Data Transmission - Soehnle SYSTO MONITOR CONNECT 300 Instrucciones De Manejo

Data transmission

After each measurement, your
personal blood pressure informati-
on is transmitted via Bluetooth to
your mobile device on which the
Soehnle Connect app is installed.
1. After the measurement, the
Bluetooth symbol ( ) flashes on
the top right of the screen. If a
connection with your mobile
device is established, the Blue-
tooth symbol ( ) freezes.
2. The new measurement data will
be transmitted after a successful
connection with your mobile
device has been established.
3. After successful transmission,
the Systo Monitor Connect 300
displays "done" on the screen.
In the event of an error during data trans-
mission, all stored values (for both users)
can be re-send. To do this, push and hold
the start/stop button for 3 seconds until
the Bluetooth symbol flashes on the screen.
Then repeat steps 2 and 3.
DATA MANAGEMENT
EN
31