Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FR
ES
Operation safety warnings
PT
IT
EL
• Check the product, its battery pack and charger as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear.
PL
• Double check that the accessories and attachments are properly fi xed.
• Always hold the product on its handle. Keep the handle dry to ensure safe support.
RU
• Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
KZ
• Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before putting
UA
it down.
RO
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the product.
BR
• Before switching the product on, check whether it has been assembled correctly and all
the moving parts are running smoothly.
EN
• We recommend slightly dampening surfaces in dusty conditions or using a mister
attachment.
• Operate the product only at reasonable hours – not early in the morning or late at night
when people might be disturbed.
• Avoid using the product in bad weather conditions, especially when there is a risk of
lightning. Do not operate the product in poor lighting. The operator requires a clear view
of the work area to identify potential hazards.
• Use of hearing protection reduces the ability to hear warnings (shouts or alarms).
The operator must pay extra attention to what is going on in the work area. Do not get
distracted, and always concentrate on the task.
• Operating similar tools nearby increases both the risk of hearing injury and the potential
for other persons to enter your work area.
• Keep fi rm footing and balance.
• Do not overreach. Overreaching can result in loss of balance. Always be sure of the
footing on slopes.
WARNING : Do not insert or remove the battery pack while the
trigger is pressed or while the chain saw is in motion.
CAUTION ! Always wear safety glasses. Wear a fi lter mask if
the operation is dusty. Use of proper gloves and substantial
footwear is also recommended.
342
Publicidad
Tabla de contenido
