Important - Delta RT-40 Manual De Instrucciones

IMPORTANT - Before assembling this machine, remove
the two bolts (A) Fig. 1 and the red shipping strap (B).
This bracket protects the motor during shipment.
HOW TO ATTACH THE HANdLE TO THE ELEVATOR MECHANISM
Insert the threaded end of the handle (A) Fig. 2 in the
threaded hole of the elevator wheel (B) and tighten it
securely by turning it clockwise.
HOW TO ATTACH THE TABLE EXTENSION WINgS
The table extension wings are very heavy.
Use a lifting device (Fig. 3) to lift and hold the extension
table in place during installation.
This machine is supplied with two table extension wings.
Attach the extension wing with the two tapped holes (A)
Fig. 4 to the right side of the machine.
A
A
Fig. 3
9
B
Fig. 1
B
Fig. 2
Fig. 4