Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ORIGINAL OPERATING INSTRUCTIONS
DAG 700 P angle grinder
It is essential that the operating instruc-
tions are read before the power tool is op-
erated for the first time.
Always keep these operating instructions
together with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to
other persons.
Contents
1. General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069467 / 000 / 00
1These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation "the
power tool" always refers to the DAG 700-P angle
grinder.
Parts, operating controls and indicators 1
@
Clamping nut
;
Outer clamping flange for flat discs
=
Flat disc
%
Inner clamping flange for flat discs
&
Page
Offset disc
(
1
Clamping flange for offset discs
)
2
Keyed locating lug
+
7
Guard
§
9
Spindle
/
9
Adjusting screw
:
11
Clamping lever
·
12
Steadying rib
$
13
Threaded bushing for grip
£
13
Drive spindle lockbutton
|
13
Side handle
¡
14
Lockable on / off switch
Q
Wrench
NOTE
Draws attention to an instruction or other useful
information.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
en
1
Publicidad
Capítulos
Tabla de contenido
