Guide System; Eu Declaration Of Conformity - Festool TS 55 REBQ Manual De Instrucciones Original

TS 55
GB
10 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
In addition to the accessories described, Festool
also provides a comprehensive range of system ac-
cessories that allow you to use your machine more
effectively and in diverse applications, e.g.:
• Parallel stop, table widener PA-TS 55
• Side-mounted cover, false joint ABSA-TS 55
• Kickback stop FS-RSP
• Parallel stop FS-PA and guide extension FS-PA-
VL
• Multifunction table MFT/3
• Compact Module System CMS-GE with CMS-TS-
55-R
10.1 Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all applica-
tions that are specially designed for your Festool
portable circular saw.
10.2

Guide system

The guide rail enables you to make clean, accurate
cuts while simultaneously protecting the surface of
the workpiece from damage.
In conjunction with the extensive range of accesso-
ries, exact angled cuts, mitre cuts and fitting work
can be completed with the guide system. The option
of attaching the guide rail securely using clamps
[9-5] ensures safer working conditions.

Adjust the guide play between the saw table and
the guide rail using the two adjustable jaws [9-
1].
Bed in the splinterguard [9-3] before using the
guide rail for the first time:

Set the machine speed to 6.

Place the machine at the rear end of the guide
rail together with the complete guide plate.

Switch on the machine.

Push down the machine slowly to the max. pre-
set cutting depth and cut along the full length of
the splinterguard without stopping.
20
The edge of the splinterguard now corresponds ex-
actly to the cutting edge.
11 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
EU only: In accordance with European
Directive on waste electrical and electronic equip-
ment and implementation in national law, used
electric power tools must be collected separately
and handed in for environmentally friendly recy-
cling.
Information on REACh: www.festool.com/reach
12

EU Declaration of Conformity

Plunge-cut saw
TS 55 REBQ
TS 55 REQ
TS 55 RQ
Year of CE mark: 2011
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following directives, standards and normative
documents:
2006/42/EG, 2004/108/EG (until 19.04.2016), 2014/
30/EU (from 20.04.2016), 2011/65/EU, EN 60745-
1:2009, EN 60745-2-5:2010,
1:2006+A2:2011, EN 55014-2:1997+Corrigendum
1997+A1:2001+A2:2008,
A1:2009+A2:2009, EN 61000-3-3:2013.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
2015-03-09
Serial no.
498500, 500898, 500602
498875, 500900, 500604
498521, 500905, 500606
EN 55014-
EN 61000-3-2:2006+