Steren CCTV-960 Manual De Instrucciones página 106

11. NETWORK CONNECTION
2. Select a mode to assign the IP address to the DVR. Enter to MENU > network and choose
from these options:
- IP (static): when you use this option, both the IP address, subnet mask, and the gateway
must be assigned manually. Remember, these parameters must be within the modem range.
Consult your network administrator for more information.
- DHCP: with this option, the modem automatically assigns the address and ranges in the IP
address, subnet mask and gateway fi elds.
3. It is recommended to leave the factory settings in the HTTP port (which establishes
communication with the modem), command port and media port fi elds; however, you can
assign a special range.
These same ports must be open on the modem to monitor the DVR locally and remotely.
51 51