Steren CCTV-960 Manual De Instrucciones página 73

If you have not installed a hard drive in the CCTV-960, it will start normally, but can only be
used to monitor, not to record.
After this, the system displays the view of the 4 channels live :
- Turn off:
Do not turn off the DVR while you are recording.
Press the mouse right button or press [ESC] on the DVR / remote control to open the toolbar,
and select the button SHUT DOWN.
Enter the user password. Once the image on the screen disappears and that the LEDs stop
blinking, use the power on / off switch to turn off the DVR.
18 18
5. BASIC FUNCTIONS AND QUICK START