Manual Recording - Steren CCTV-960 Manual De Instrucciones

9. RECORDING
Before you can start recording it is essential that you have installed and formatted the
hard disk, otherwise it will only be limited to the camera viewing.
The DVR has 2 recording methods:

9.1 Manual recording

This recording mode is used when the DVR does not have any recording confi guration
(event, time or alarm).
• Option 1: press at any time the [REC] button on the front
panel or remote control. The gray appears indicator in the
active channels and the red LED will begin to Flash, noting the
recording status.
Press [REC] again to stop recording.
To stop recording, press the REC button (front panel / remote control) or uncheck the
channels that perform recordings.
24 24
• Option 2: press [MENU] on the remote control / front
panel of the DVR or double click with the mouse and
select [Manual record] on the toolbar.
The following window appears, select the channels to
be recorded and press [OK] to confi rm.
CH1 CH2 CH3
MENU REC
ESC BACKUP