Steren CCTV-960 Manual De Instrucciones página 95

13.2 Record
It contains settings regarding schedules and recording quality.
-VIDEO CH: Select the camera channel to apply relevant confi gurations. Select "All" to apply
to all channels.
-RECORD SCHEDULE: In this section, recording hours can be adjusted, see 9.
RECORDING for more information.
-RECORD QUALITY: select the quality level for recording audio / video. The options are
better (768 kbps), high (640 Kbps), medium (512 kbps), low (384 kbps) or user-defi ned.
-RECORD FRAME RATE: adjusts the frequency measurement at which the frames will be
generated, the options are 1, 3, 7 and 15 FPS, all (30/25 fps) or user-defi ned.
For the user-defi ned option, click the >> key to access the keypad. Enter the value of the
quality of the recording and click OK to accept the changes.
-RECORD SOURCE: select the recording mode, video and audio or video record only.
-OSD SETTING: Defi ne the information that will be recorded as OSD (on screen display).
The options are: brand name and time stamp of the camera, camera name, time stamp, or
none. Use the arrow buttons to select an option.
-RECORD RESOLUTION: selects the recording resolution, the options are: CIF(352 x 240
or 352 x 288), Half D1(704 x 240 ó 704 x 288) and D1(704 x 480 ó 704 x 576). By default the
CCTV-960 has the video adjusted in CIF format.
40 40
13. SYSTEM CONFIGURATION
-SUB STREAM: the DVR can transmit
information to be view using the IE browser.
You can activate / deactivate (ON/OFF)
secondary code or create settings customized
by pressing the > > button to set the frames per
second (FPS) and Bitrate (Kbit/s).