Hard Drive Installation - Steren CCTV-960 Manual De Instrucciones

8. USING THE HARD DISK
4. Click on [> >] to open hard disk management window.
5. Information on the hard disk Displays. Click [Formatting] to start the hard disk formatting.
6. Wait for the process to complete and select [Quit] to return to the main menu.
The entire contents of the disk will be deleted when it is formatted.
Reformatting your hard drive will not erase recording confi guration, users and passwords
established in CCTV-960. Only videos and extras data contained in the hard disk will be
deleted.

8.2 Hard drive installation

1. Remove the screws (4 on the sides, 3 in the back) from the DVR cover and carefully pull
cover off.
2. Connect the fl at SATA cable to your hard drive, making sure to insert it properly by aligning
the tab on the side of the cable to the opening in the DVR, otherwise you will not be able to
connect it.
3. Connect the power cable to the hard drive.
4. Place the hard drive inside the DVR. Secure it in place with screws on each side.
5. Place the outer cover back on and be sure to reattach it fi rmly with the screws.
23 23