System Configuration - Steren CCTV-960 Manual De Instrucciones

13. SYSTEM CONFIGURATION

After you install the DVR and cameras, you can perform the major adjustments with the
Setting option on the toolbar; to enter this menu, there are three modes:
(a) Press the right button of the mouse on the channel display screen and select the Setting
option.
(b) Press the MENU button on the front panel of the DVR.
(c) press the MENU button on the remote control.
SET menu is made up of 6 main menus containing adjustment submenus.
13.1 System
In this menu you can confi gure main and advanced settings of the CCTV-960.
-LANGUAGE: changes the language menu on the DVR and the language for the display
texts.
-VIDEO STANDARD: select the video standard of the CCTV-960 (NTSC, PAL or SECAM).
To USA and Mexico use NTSC. Video by default of the DVR system is "NTSC". The change
is effective after you save and exit the menu.
-VGA SETTING: Switching between different resolutions from VGA output, options are
1024x768@60Hz, 1280x1024@60Hz, 1440x900@60Hz,800x600@60Hz
-TIME FORMAT: changes the time between 12 and 24 hour format.
-TIME FORMAT: adjusts the date and time values. In order to avoid confusion of the
recorded fi les, it is best to stop the recording before you modify the time and date.
-DST: in this section you can enable (Enable) or disable (Disable) the summer time. Set the
start date and the date of completion according to your region.
It is recommended that you set the time and correct the DST date, because where you need
to check some crucial event this it will give veracity to the video captured by the CCTV-960.
38 38