General Indications - Faema E91 AMBASSADOR Manual Del Usuario

Tabla de contenido

Publicidad

English
6.4 Drinks distribution - milk (where contemplated)

GENERAL INDICATIONS

Milk is a delicate biological product and can easily deteriorate.
Heat modifies its structure. Milk must be kept at a storage
temperature no higher than 5°C (41°F) from the moment the
container is opened and throughout its entire period of use.
Our storage appliances are suitable for this purpose.
NOTE: at the end of the work day (or not more than 24 hours
from the time the container is opened), any remaining milk
must be discarded.
MILK DISTRIBUTION
(Push botton (16) programmed as milk key)
Insert the tube (18d) into the milk.
After having positioned the appropriate container under the
cappuccino maker (18), press the milk distribution key (16).
The led above the selected key lights up.
The quantity of milk memorized during the programming
phase will flow into the cup and will stop automatically. The
flow can be stopped at any time by pressing the milk
distribution key (16) again.
Paragraph, "User Instructions for the Cappuccino Maker"
describes how to adjust the temperature of the milk and
the density of the milk froth.
6.5 Drinks distribution - cappuccino (where contemplated)
GENERAL INDICATIONS
Milk is a delicate biological product and can easily deteriorate.
Heat modifies its structure. Milk must be kept at a storage
temperature no higher than 5°C (41°F) from the moment the
container is opened and throughout its entire period of use.
Our storage appliances are suitable for this purpose.
NOTE: at the end of the work day (or not more than 24 hours
from the time the container is opened), any remaining milk
must be discarded.
PREPARATION OF CAPPUCCINO
(Push botton (16) programmed as cappuccino key)
- Just use the filter-holder that has a single spout.
- Remove the filter-holder from the dispenser unit and
remove all the used coffee grounds; then fill with fresh
ground coffee and press firmly.
- Insert the filter-holder (21) into the dispenser unit and
secure firmly.
- Plunge the small pipe (18d) into the milk container.
- Place a cappuccino cup or other appropriate container
under the spout; with the special spout of the milk frother
(18), the cappuccino cup or other container must not be
moved between the dispensing of the coffee and milk.
- Press the cappuccino dispensing button (C): dispensing
starts and then stops automatically when the serving has
been dispensed. Dosed serving dispensing can be
interrupted at any time by pressing the cappuccino
dispensing button (C) again.
18
"When the machine is not used for a long period of
time, comply with the hygiene procedures regarding
preservation of milk".
21
Paragraph, "User Instructions for the Cappuccino Maker"
describes how to adjust the temperature of the milk and
the density of the milk froth.
46
C
18
English
16
18d
18d

Publicidad

Tabla de contenido
loading

Tabla de contenido