Operation Of Hands-Free Phoning; Before Use; Receiving A Call; During A Call - Kenwood KDC-BT742U Manual De Instrucciones

Function of KDC-BT742U

Operation of hands-free phoning

Before Use

• For details on the Bluetooth cell-phone with the
hands-free function, see <About the Cell-Phone>
(page 37).
• You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Bluetooth device> (page 28).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 29).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 29).
• "BT" indicator is lit when a cell-phone is connected
to this unit.

Receiving a call

Answering a Phone Call
Press the [AUD] button.
⁄
• The following operations disconnect the line:
- Insert a CD.
- Connect a USB device.
• The name of the calling party is displayed if it has already
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button or press the [
for at least 1 second.

During a call

Disconnecting a Call
Press the [SRC] button or press the [
for at least 1 second.
Switching to the Private Mode
Press the [38] button.
Switches between Private talk ("PRIVATE TALK")
and Hands-free talk ("HANDS FREE") each time this
button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.

Call waiting

Answering Another Incoming Call with the
Current Call Suspended
Press the [AUD] knob.
1
Turn the [AUD] knob or push it towards up or
2
down. Select the "ANSWER" display.
Press the [AUD] knob.
3
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button or press the [
for at least 1 second.
Continuing the Current Call
Press the [AUD] knob.
1
Turn the [AUD] knob or push it towards up or
2
down. Select the "REJECT" display.
Press the [AUD] knob.
3
Answering the Waiting Call after Terminating
the Current Call
Press the [SRC] button or press the [
] button
for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the [AUD] knob.
Each pressing of this knob switches the calling
party.
] button

Other functions

Clearing the Disconnection Message
Press the [
"HF DISCONCT" disappears.
Switching between Display Modes
Press the [38] button for at least 1 second.
Pressing this button each time switches between
name and telephone number.
] button.
English
] button
] button
15
|