Making A Call; Dial A Number; Speed Dialing (Preset Dial); Calling A Number In The Phone Book - Kenwood KDC-BT742U Manual De Instrucciones

Function of KDC-BT742U
Operation of hands-free phoning

Making a call

1
Enter dialing method mode
Press the [ ] button.
2
Select a dialing method
Press the [AUD] knob.
"NUMBER DIAL" » "PHONE BOOK1" » "PHONE BOOK2"
» "OUT-CALL" » "IN-CALL" » "MISSED CALLS"
Methods of operations in the above modes are
described below.
3
Exit the dialing method mode
Press the [ ] button.

Dial a number

1
Enter dialing method mode
Press the [ ] button.
2
Select the number dial mode
Press the [AUD] knob.
Select the "NUMBER DIAL" display.
3
Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
4
Make a call
Press the [DIRECT] button on the remote
controller.
To erase the entered phone number digit by
digit:
Press the [4] button on the remote controller.
⁄
• You can input max 32 digits.

Speed dialing (Preset dial)

1
Enter dialing method mode
Press the [ ] button.
2 Press the [AUD] knob.
Select the "NUMBER DIAL" display.
3
Enter preset dial mode
Press the [SEARCH] button.
4
Select the number you want to recall from the
memory
16
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
Turn the [AUD] knob or push it towards up or
down.
Press the [AUD] knob.
5
Phone number is displayed.
6
Make a call
Press the [AUD] knob for at least 1 second.
⁄
• You need to register the preset dial number. (page 17)

Calling a number in the Phone Book

1
Enter dialing method mode
Press the [ ] button.
2
Select the Phone Book mode
Press the [AUD] knob.
Select the "PHONE BOOK1" display, proceed to step
3.
Select the "PHONE BOOK2" display, proceed to step
4.
3
Select the initial to be searched for
Operation type
Move to the next character.
Move to the next row.
Determine the selected initial. Press the [AUD] knob for at least 1
4
Select the name
Operation type
Move to the next phone
number.
Move to the next name.
5
Make a call
Press the [AUD] knob for at least 1 second.
⁄
• During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".
Operation
Turn the [AUD] knob or push it towards
right or left.
Push the [AUD] knob towards up or
down.
second.
Operation
Turn the [AUD] knob or push it towards
up or down.
Push the [AUD] knob towards right
or left.