3M Emphaze AEX Hybrid Purifier Instrucciones De Instalación Y Operación Para página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
To reduce the risk of product loss associated with a) chemical release from
purifi cation media, and b) nullifi cation of Supplier's USP<88> Class VI compliance of
fi lter capsule components:
After pre-use NaOH sanitization, fl ush the system with appropriate aqueous buff er
until the pH range 5-9 has attained and monitor the pH of the capsule effl uent to
determine when the baseline has been reach (e.g., ± 0.5 pH units from the pH of the
buff er used to fl ush the media).
4.B. Required Preconditioning Flush Procedure for the Pre-use NaOH
Sanitized BV0.3R and BV1R Capsules
Perform Required Preconditioning Flush procedure as described in Section 2.A.
IMPORTANT NOTICE: Monitor the pH of the capsule effl uent to determine when the
baseline has been reach (e.g., ± 0.5 pH units from the pH of the buff er used to fl ush
the media).
IMPORTANT NOTICE: Do not blow down with a gas the 3M™ Emphaze™ AEX Hybrid
Purifi er capsules after preconditioning fl ush procedure.
Capsule is ready for immediate use.
IMPORTANT NOTICE: Do not blow down 3M Emphaze AEX Hybrid Purifi er capsules after
pre-conditioning fl ush procedure.
4.C. Single-stage Purifi cation
Perform Single-stage Purifi cation as described in Section 2.B.
WARNING
- 16 -

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bv0.3rBv1rEmp101aex020rEmp201aex020r

Tabla de contenido