Sunrise Medical JAY Fit Manual Del Usuario página 20

E N G L I S H
O. ADJUSTABLE QUICK MOUNT ATTACHING BACK
HARDWARE
To Remove the Back:
1. With the chair unoccupied, release the Snaptite hinge
(V).
2. For a wheelchair with a Transit Option, you must release
the safety retainer strap (W) first.
3. Tilt the top of the back forward and lift from the lower
back receivers (Y).
To Attach the Back:
1. Holding the back, slide the lower stud bracket nuts (X)
into the lower back receivers (Y).
2. Press the Snaptite attaching hardware around the
Snaptite receiver (U) and snap the hinge (V) shut.
3. For a wheelchair with the Sunrise Transit Option, you
MUST re-attach the safety retainer strap (W) by pulling it
around the Snaptite hinge (V).
WARNING!
Risk of injuries and how to avoid them:
• Failure to lock the back in place on the chair back post,
may cause the back to disengage from the chair frame,
potentially causing the rider to fall.
To avoid the risk:
• It is vital to follow all instructions when re-attaching the
back.
• Before seating the rider, ensure that the back is locked in
place.
• Return to your authorised supplier for adjustment if the
Snaptite hinge does not close with ease around the
receiver, or if the safety retainer strap does not fit around
the hinge.
Jay Fit Back
I N S TA L L AT I O N A N D A D J U S T M E N T
Fig.23.0
Fig.24.0
Fig.25.0
20
U
V
V
W
X
Y
Rev.D