Maintenance; Environmental Protection - SPARKY HeavyDuty BR2 7.2Li HD Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
WARNING: Over-tightening can result
in the screw breaking or damage to the end of
the driver bit.
WARNING: If the machine is held at
an angle to the screw being tightened, the head
of the screw may be damaged, or the specified
torque may not be transmitted to the screw. Al-
ways keep the machine and the screw being
tightened in a straight line.
IX - Maintenance
WARNING: Always set the forward/re-
verse switch (6) in central position before any
work on the machine e. g. fitting and removing
a battery, tool change, transport, maintenance
and storage.
Regularly check that all the fixing screws are tight.
They may vibrate loose over time.
CLEANING
For safe operation always keep the machine and
its ventilation slots clean.
Regularly check to see if any dust or foreign matter
has entered the grills near the motor and around
the switches. Use a soft brush to remove any ac-
cumulated dust. Wear safety glasses to protect
your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with
a soft damp cloth. A mild detergent can be used.
WARNING: Never use alcohol, petrol or
other cleaning agent. Never use caustic agents
to clean plastic parts.
WARNING: Water must never come
into contact with the tool.
10
EN
pages BR2-7.2LiHD.indd 10
CHARGER CLEANING INSTRUCTIONS
WARNING: Disconnect the charger
from the AC outlet before cleaning.
▪ Dirt and grease may be removed from the ex-
terior of the charger using a cloth or soft non-
metallic brush. Do not use water or any clean-
ing solutions.
IMPORTANT! To assure product safety and reli-
ability, repairs, maintenance and adjustment (in-
cluding brush inspection and replacement) should
be performed by certified service centres or other
qualified service organisations, always using gen-
uine replacement parts.
X - Environmental
Protection
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
For EU-countries only:
Do not dispose of the power tool into
household waste! According to the guidelines
2002/96/EC, power tools, which are not usable,
should be recycled.
Batteries:
Do not dispose of the power tool or
the battery into household waste, fire
or water. All type of batteries should be
sorted for environmental-friendly recy-
cling or destroyed.
For EU-countries only:
Defective or worn out batteries must be recycled
according to the guidelines 91/157/EEC.
BR2 7.2Li HD
9.11.2011 . 09:43:13 .

Publicidad

Tabla de contenido
loading

Tabla de contenido