STOK QUATTRO SGP4033N Manual Del Operador página 15

STEP 11: INSTALLING THE GRILL DOORS
See Figure 17.
 Holding the grill door (left) securely, slide the pin in the
bottom of the door into the hole in the base of the cabinet.
 Align the hole in the top of the door with the hole (left
side) in the front panel.
 From inside the cabinet, slide the pin (GG) into the hole
in the front panel and through the hole in the top of the
grill door.
 Repeat above steps for the right grill door.
FRONT
PANEL
PIN
GRILL DOOR
Fig. 17
STEP 12: INSTALLING THE GREASE TRAY AND
CUP
See Figure 18.
 From behind the grill, slide the grease tray into the tray
holders.
NOTE: The grease tray has tabs and will only install one
way.
 With the grease tray firmly in place, slide the grease cup
into the cup holder on the bottom of the grease tray.
NOTE: Clean the grease tray and cup after each use. Do
not remove the grease tray and cup until after the grill
has completely cooled.
PIN (GG)
HOLE
BASE
ASSEMBLY
TAB
Fig. 18
STEP 13: ATTACHING SPICE RACK TO GRILL
DOOR
See Figure 19.
 Tilt bottom of spice rack so that the hanging wire and
holes in the left grill door align.
 Place wire in holes and let spice rack rest against the
inside of the door.
Fig. 19
15 - English
GREASE
TRAY
SPICE RACK
TAB
GREASE
CUP