USING THE GRILL AND ACCESSORIES
See Figure 29.
WARNING:
Never use an accessory if the porcelain coating is
damaged or chipped. Use with a damaged coating could
result in serious personal injury if ingested.
To use the insert removal tool:
NOTE: Only use the insert removal tool on tabbed inserts.
Slide the hooks on the end of the insert tool under the
tab on the insert.
Lower the tool so that the bottom latch catches under
the insert tab.
To release: Lift the orange release button with your thumb
then remove the insert removal tool from the insert.
To use the grate to grill meat:
Turn on the grill and close the hood. Preheat the grill for
10 – 15 minutes.
Open the hood and place the meat on clean grates and
close the hood. Cooking time will vary depending on
personal preference.
NOTE: When grilling fish, the meat is typically done when
it flakes easily with a fork. If any part of the meat is glossy
in appearance, it is not done.
When finished cooking, turn the control knobs and cylinder
valve off.
After the grill has cooled, clean grates, grease tray, and
grease cup.
OPERATION
INSERT
TOOL
Fig. 29
22 - English
TAB
RELEASE
BUTTON