Tools Needed - STOK QUATTRO SGP4033N Manual Del Operador

KNOW YOUR GRILL
See Figure 2.
The safe use of this grill requires an understanding of the
information on the grill and in this operator's manual. Before
use of this grill, familiarize yourself with all operating features
and safety rules.
CABINET - The two-door steel cabinet rolls easily from
place-to-place. The cabinet base has a cut-out to support
the LP gas cylinder.
CONTROL PANEL - Control heat levels from the front of the
grill using the control knobs.
ELECTRIC IGNITOR - The electric ignitor uses a AA battery
that lights the gas burners when pushed.
INSERT REMOVAL TOOL - Allows you to easily place and
remove a variety of STOK cooking inserts.
INSERT STORAGE -The pizza stone and other inserts
can be stored inside the cabinet using the insert storage
brackets.
The following tools (not included or drawn to scale) are needed for assembly and making adjustments:
SCREWDRIVER
Fig. 3

TOOLS NEEDED

PHILLIPS
FEATURES
REMOVABLE GRATE INSERTS - Remove one or both of the
round porcelain-coated, cast-iron grate inserts when using
the pizza stone or other inserts (sold separately).
SIDE SHELVES - Side shelves provide flat surfaces for your
convenience.
SPICE RACK - Keep spices close at hand by storing them in
the convenient adjustable spice rack attached to the inside
of the cabinet door.
TEMPERATURE GAUGE - The temperature gauge in the
hood measures the air temperature inside the grill. The
air temperature is never as hot as the cooking surface
temperature.
WARMING RACK - Located inside the hood, the warming
rack keeps cooked food warm until serving time.
7 - English
ADJUSTABLE WRENCH