Important Guidelines - Imetec F4101 Instrucciones De Uso

After having removed the appliance from its packaging, check the integrity of the supply
based on the drawing and any presence of transport damages. If in doubt, do not
use the appliance and contact the authorised service centre.
Do not let children play with the packaging! Keep the plastic wrapping out of the
reach of children; risk of suffocation!
Before connecting the appliance, check to make sure that the mains voltage carried
on the identification specifications corresponds to that of the available electrical
mains. The identification plate is attached to the appliance.
This appliance must be used solely for the purpose for which it was designed,
namely, as a boiler iron for home use. Any other use is improper and potentially
dangerous.
In case of a fault or malfunctioning of the appliance, switch it off and do not tamper
with it. If the appliance needs to be repaired, contact an authorised technical service
centre.
DO NOT use the appliance with wet hands, damp feet or barefoot.
DO NOT pull the power cord or the appliance itself to remove the plug from
the socket.
DO NOT expose the appliance to humidity or weather conditions (rain, sun,
etc.).
If the power cord is damaged, it must be replaced by an authorised technical service
centre, so as to prevent all risks.
The electrical safety of this appliance is only guaranteed when it is connected
correctly to an effective earthing system as required by applicable electrical safety
standards. This important safety requirement must be verified and if in doubt,
request a thorough check of the system by a skilled technician.
DO NOT immerse the iron, the power cord or the plug in any kind of liquid.
DO NOT leave the hot iron in contact with easily flammable fabric.
DO NOT press the steam button when the iron is resting on its mat.
DO NOT use chemical additives, scented substances or descaling agents.

IMPORTANT GUIDELINES

The appliance is designed to work with tap water, however, if the water in your residence area
is very hard, mix the tap water (50%) with distilled and/or demineralised water (50%). Salt
concentration in water in certain seaside areas is very high: in which case, demineralised
water for steam irons (available on the market) must be used. in which case, demineralised
water for steam irons (available on the market) must be used.
Do not introduce diluting agents, scented liquids or descaling agents. These can damage
the product.
GB
11