Important Guidelines - Imetec TITANOX K113 Instrucciones De Uso

EN
visibly damaged or if it leaks water.
• If the power cable is damaged it must be replaced by an
authorised technical service centre, so as to prevent all
risks.
• The electrical safety of this appliance is only guaranteed
when it is connected correctly to an effective earthing
system as required by applicable electrical safety standards.
This important safety requirement must be verified and,
if in doubt, request a thorough check of the system by a
qualified technician.
DO NOT immerse the iron, the power cord or the plug in
any kind of liquid.
DO NOT leave the hot iron in contact with easily flammable
fabric.
DO NOT leave the iron unattended when connected to
the power supply.
DO NOT dispense steam when the iron is resting on its
mat.
ATTENTION! Hot surface.
DO NOT use chemical additives, scented substances or
descaling agents.
• This iron is not equipped with a pressure boiler and has
been designed to be used for brief periods of time in order
to prevent stress related to this chore. For this reason it is
recommended not to iron for more than an hour.

IMPORTANT GUIDELINES

The appliance is designed to work with tap water; however, if
the water in your area is very hard, mix the tap water (50%) with
distilled and/or demineralised water (50%). Salt concentration
in water in certain seaside areas is very high: in such cases it
is important to use "demineralised water for irons" available
on the market. If in doubt, only demineralised water for steam
irons must be used.
Do not use diluting agents, scented liquids or descaling
12