Whirlpool SPIW409A2WF Instrucciones De Uso página 13

Ocultar thumbs Ver también para SPIW409A2WF:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Troubleshooting
Operation problems are often due to minor causes, please check and refer
to the following chart before contacting the service. This may save time and
unnecessary expenses.
Trouble
Does not run
No cooling or
heating air
Ineffective control
Does not operate
immediately
Peculiar smell
A sound of running
water
Cracking sound
Mist sprays from
the outlet
Running indicator
flashes but indoor
fan stops
Note: If the problems still have, turn off the appliance and disconnect from
power supply, then contact the nearest Whirlpool Authorized Service Center. Do
not attempt to move, repair, disassemble, or modify the appliance by yourself.
• Is the protection device or fuse blown?
• Please wait for 3 minutes and start again, protection
device may be preventing unit to work.
• Are the remote control batteries low?
• Is the plug not properly plugged?
• Is the air filter dirty?
• Are the intakes and outlets of the air conditioner blocked?
• Is the temperature set properly?
• Are doors or windows open?
• Has there been a strong interference (from excessive
static electricity discharge, power supply voltage
abnormality)? Note that operation will be abnormal, in
this case unplug from the power supply and re-plug after
2-3 seconds.
• 3 minute delay will occur when changing mode during
operation.
• This smell may come from another source such as
furniture, cigarette etc, which is sucked in the unit and
blown out with the air.
• Normal behaviour caused by the flow of refrigerant in the
air conditioner.
• Defrosting sound in heating mode.
• The sound may be generated by the expansion or
contraction of the front panel due to temperature
changes.
• Mist is present in the room with low temperature? Normal
behaviour due to cool air discharged from indoor unit
during COOLING or DRY operation mode.
• The unit is shifting from heating mode to defrost. The
indicator will light off and return to heating mode.
Analysis
- 13 -

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido