TFA Dostmann MAXIM II Manual De Instrucciones página 35

1. Press the SET key after entering the manual time setting in order to
enter the year setting (flashing). Reset the year by pressing the IN
key. The range runs from 2006 to 2039.
2. Press the SET key again to enter the month and date display
(flashing).
3. Using the OUT key, set the month required. Using the IN key, set
the date required.
Press the SET again to confirm and to enter the "Snooze setting"
4.
or exit the setting mode by pressing the CHANNEL key.
SNOOZE SETTING
Important:
The snooze setting in this thermo-hygro-station will not have any
effect in this unit performance. This feature is only available in
enhance model with alarm function. Simply press the SET key to
skip this setting and enter the "°C/°F setting" or exit the setting
mode by pressing the CHANNEL key.
°C/°F SETTING:
The default temperature reading is set to °C (degree Celsius). To select
°F (degree Fahrenheit):
The "°C" will be flashing, use the IN key to toggle between "°C" and
1.
"°F".
Once the desired temperature unit has been chosen, confirm with
2.
the SET key and enter the "Weather Forecast Icon Sensitivity
setting" or exit the setting mode by pressing the CHANNEL key.
WEATHER FORECASTING ICON SENSITIVITY SETTING
Important:
The weather forecast icon sensitivity setting in this Thermo-hygro-
station will not have any effect in this unit performance. This feature
is only available in enhance model with weather forecast feature.
Simply press the SET key to exit the setting mode.
34
Flashing