* When the signal is successfully received by the thermo-hygro-station,
the outdoor transmission icon will be switched on. (If not successful, the
icon will not be shown on LCD). The user can then easily see whether the
last reception was successful (icon on) or not (icon off). On the other
hand, the short blinking of the icon shows that a reception is currently
taking place.
MANUAL SETTINGS
The following manual settings can be changed when pressing the SET
key for:
LCD contrast setting
Time zone setting
Time reception ON/OFF setting
12/24-Hour setting
Manual time setting
Calendar setting
Snooze setting
°C/°F setting
Weather forecasting icon sensitivity setting
LCD CONTRAST SETTING:
The LCD contrast can be set to 8 different levels (0-7) to suit the user's
needs (default LCD contrast setting is LCD 5). To set the desired contrast
level:
1.
Press and hold SET key. The LCD contrast will start flashing on the
LCD.
2.
Press the IN key to select the level of contrast desired.
Press the SET key to confirm and enter the "Time zone setting" or
3.
exit the setting mode by pressing the CHANNEL key.
TIME ZONE SETTING:
The time zone default of the thermo-hygro-station is 0. To re-set the time
zone:
LCD (flashing)
Time Zone
(flashing)
31