Setting Mode; Audible Signals; First Use - AEG FAVORIT 44010 VIL Manual De Instrucciones

6

First use

• the activation/deactivation of the rinse aid dispenser
• the activation/deactivation of the audible signals
can also be set with the help of these buttons.

Setting mode

The appliance is in setting mode when all programme lights are illuminated.
Always remember that when performing operations such as:
• selecting a washing programme
• setting the water softener
• activating/deactivating the rinse aid dispenser
• activating/deactivating the audible signals
the appliance MUST be in setting mode.
If a programme light is illuminated, the last performed programme is still set.
In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress: simultaneously press and hold
the two programme buttons positioned over the word RESET, until all the programme
button lights will illuminate. The programme has been cancelled and the machine is now
in setting mode.

Audible signals

Audible signals have been introduced to help indicate which operations the appliance is
performing:
• setting the water softener
• end of the washing programme
• intervention of an alarm due to malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the function buttons.
Deactivation/activation of the audible signals
1. Press the On/Off button. The appliance must be in setting mode.
2. Press and hold buttons B and C until the light of the buttons A, B and C start flashing.
3. Press button C, the lights of buttons A and B turn off while the light of button C goes
on flashing. At the same time the End of programme indicator light illuminates in-
dicating that the audible signals are active.
4. To deactivate the audible signals press again the button C: the End of programme
light turns off indicating that the audible signals have been deactivated.
5. To memorize the operation, switch off the dishwasher.
6. To activate again the audible signals, simply follow the above operations until the End
of programme indicator light illuminates.
First use
Before using your dishwasher for the first time:
• Ensure that the electrical and water connections comply with the installation instruc-
tions