Consumption Values; Information For Test Institutes; Settings; Programme Selection Mode And User Mode - AEG FAVORIT 88705 IM0P Manual De Instrucciones

5.1 Consumption values

Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The activation or deactivation of the
rinse aid dispenser.
• The level of rinse aid according to the
required dosage.
• The activation or the deactivation of
the option AutoOpen.
These settings will be saved until you
change them again.
Water
1)
(l)
11
7 - 14
12.5 - 14.5
12 - 14
9.5 - 10.5
10
4
9 - 10
Energy
(kWh)
0.857
0.6 - 1.6
1.4 - 1.8
0.7 - 0.9
1.10 - 1.30
0.9
0.1
1.1 - 1.3
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the
programme duration.
When you activate the appliance, usually
it is in programme selection mode.
However, if this does not happen, you
can set the programme selection mode
in the following way:
Press and hold simultaneously Delay and
Option until the appliance is in
programme selection mode.

6.2 The water softener

The water softener removes minerals
from the water supply, which would have
ENGLISH 9
Duration
(min)
225
40 - 160
169 - 179
75 - 85
55 - 65
30
14
219 - 229