Navigating Menus by Using the Menu Map
Using the Menu Map of the main menu enables you to view all menus and select a function quickly.
You can select any menu by using the menu map.
1
Pressthe MENU button.
The main menu will appear at the bottom of the
screen.
2
Press the 4 or _. button to select Menu Map,
then press the ENTER button. The menu map will
appear.
3
Press the A/VV4/_- button to select a menu,
then press the ENTER button. The selected menu
will appear.
4
Pressthe A/T/_/_-/ENTER
buttonsto display,
change, or use the selected items.
Red button: Toggles between alphabetical order display and functional order display.
Green button: Moves to the previous page.
Yellow button: Moves to the next page.
ENTER button: Moves to the selected menu.
Press the EXIT button to exit.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels
are memorized, use the CH A and CH V button to scan through the channels. This eliminates the need to change channels
by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels(automatic) and adding or deleting channels(manual).
Selecting
the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is
connected to the TV(i.e. an air or a cable system).
1
Press the MENU button.
Press the 4 or _. button to select Channel, then press the ENTER button.
Press the A or T button to select Antenna, then press the ENTER button.
2
Press the A or T button to select Air or Cable, then press the ENTER button.
Continued...