Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting Cable "iV
To connect to a cable TV system, follow the instructions below,
Cable without a Cable Box
1
Plug the incoming cable into the ANT I IN (CABLE) terminal on the rear of the TV.
_-
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connecting_to a Cable Box that Descrambles All Channels
1
Find the cable that is connected to the ANT OUT terminal on your cable box.
_- This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2
Connect the other end of this cable to the ANT 1 IN (CABLE) terminal on the rear of the TV.
Connecting_to a Cable Box that Descrambles Some Channels
if your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need
a two=way splitter, an RF (A/B) switch, and four lengths of Antenna cable, (These items are available at most electronics
stores.)
Find and disconnect the cable that is connected
to the ANT IN terminal on your cable box.
_- This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN".
TIN
2
Connect this cable to a two-way splitter.
Connect an Antenna cable between an OUTPUT
terminal on the splitter and the IN terminal on the
cable box.
incoming
cable
Splitter
incoming
cable
IN
CABLE
OUT]
Cable
Box
Connect an Antenna cable between the ANT OUT
terminal on the cable box and the B-IN terminal
on the RF(A/B) switch.
Splitter
RF (NB)
Switch
Connect another cable between the other OUT
terminal on the splitter and the A-IN terminal on
the RF (A/B) switch.
Connect the last Antenna cable between the OUT
terminal on the RF (A/B) switch and the ANT 1 IN
(CABLE) terminal on the rear of the TV.
Cable
Box
Switch
__
,,=-,,,=,=,=..-_d_
_._,_
cable
Splitter
L
p
RF (A/B)
Cable Box
Switch
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to
view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which
is usually channel 3 or 4.)
Publicidad
Capítulos
