Making Detailed Picture Settings
You can set detailed picture settings.
1
Pressthe MENU button.
Press the ENTER button to select Picture.
Press the A or T button to select Detailed Settings, then press the ENTER button.
2
3
Select the required option by pressing the A or T button, then press the ENTER button.
When you are satisfied with your setting, press the ENTER button.
Press the EXIT button to exit.
_- When the picture mode is set to Standard or Movie, Detailed Settings can be selected.
_-
If DNme is set to Off and the picture mode is in Dynamic or Standard mode, the Detailed
Settings cannot be selected.
•
Black Adjust: OfflLowlMediumlHigh
You can directly select the black level on the screen to adjust the screen depth.
•
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
•
Gamma:-3~+3
You can adjust the Primary Color intensity.
Press the _ or _. button until you reach the optimal setting
®
White Balance: .10 ~+10
You can adjust the color temperature for more natural picture colors.
Press the _1or _ button until you reach the optimal setting.
•
MyCotor Control: RedlGreenlBluelYetlowlPinldReset
This setting can be adjusted to suit your personal preferences.
RedlBluelGreenlYellowlPink:
Changing the adjustment value _.ill refresh the adjusted screen.
Select the required option by pressing the A. or _' button, then press the ENTER button.
Press the 4 or _ button until you reach the optimal setting
Reset: The previously adjusted colors will be reset to the factory defaults.
•
Edge Enhancement: Off/On
You can emphasize object boundaries.