Sound Settings - Blaupunkt BREMEN SQR 46 DAB Manual De Instrucciones

Sound settings

Sound settings
The following sound settings can be changed inthe "AUDIO" menu:
• Adjusting bass and treble
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
• Setting the left/right volume distribution (Balance) or front/rear
(Fader)
• Adjusting the increase of bass at low volume (Loudness)
• Selecting a sound pro le
• Selecting level and frequency of the preampli er output(Sub-Out).
• Adjusting the time delay for switching in an external ampli er.
• Setting the 3-band equaliser
Calling and exiting the "AUDIO"
menu
Brei y press the MENU button to open the user menu.
Turn the rotary control until the "AUDIO" menu item is selected.
Press the rotary control to open the "AUDIO" menu.
Turn the rotary control until the desired menu item is selected.
Perform the setting (see the next section).
Brei y press the MENU button to exit the menu.
Notes:
• The menu is automatically exited approx. 15 seconds after the
last button activation and you are returned to the display of the
current audio source.
• To go back to the next higher-level menu, turn the rotary control
until the "<<<" option is selected and press the rotary control.
Making settings in the "AUDIO" menu
BASS
Bass level. Settings: –7 to +7.
Rotary bass control to change the setting until the desired level is
set.
22
BR460 BR460
AUTORADIO
TREBLE
Bass level. Settings: –7 to +7.
Rotary treble control to change the setting until the desired level is
set.
BALANCE
Left/right BALANCE distribution. Settings: L9 (left) to R9(right).
Rotary balance control to change the setting until the desired volume
distribution is set.
FADER
Front/Rear FADER distribution. Settings: F9 (front） to R9(rear).
Bedienungsanleitung
Turn the rotary control to change between the settings.
Press the rotary control to con rm the setting.
Operating instructions
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
Mode d' emploi
Turn the rotary control to change between the settings.
Istruzionl of uso
Press the rotary control to con rm the setting.
PRESET EQ (sound pro le)
Gebruiksaanwijizing
Selecting equalizer presettings. Settings: POP, ROCK, CLAS (classic), OFF (no
presetting).
Bruksanvisining
Turn the rotary control to change between the settings.
Press the rotary control to con rm the setting.
SUB-OUT
Setting the level and frequency of the preamplier output.
Press the rotary control to open the menu.
Turn the rotary control to change between the following menu items:
– FREQUENCY (settings: 80/120/160 Hz)
– GAIN (settings: 0 to +7)
22
53
22.05.19 17:00 22.05.19 17:00