Battery Installation - Omron M6 Comfort IT Manual De Uso

HEM-7322U-E_A_M.book Page 7 Friday, November 8, 2013 1:55 PM
2. Preparation

2.1 Battery Installation

1.
Remove the battery cover.
2.
Insert 4 "AA" batteries as
indicated in the battery
compartment.
3.
Replace the battery cover.
Notes:
• When the low battery symbol (
at the same time. Long life alkaline batteries are recommended.
• The measurement values continue to be stored in memory even after the batteries are replaced.
• The supplied batteries may have a shorter life.
Disposal of used batteries should be carried out in accordance with the national/local regulations for the
disposal of batteries.
) appears on the display, turn the monitor off, then replace all batteries
EN
7