Changing Images And Animations; (Sd Browser/Usb Browser) - Blaupunkt Memphis MP66 Instrucciones De Manejo E Instalación

•
: The welcome text is
shown after switch-on.
•
: The welcome text is not
shown.
To change the welcome text, see
"Changing the welcome text (Turn
On Text)" on page 54.

Changing images and animations

( SD Browser/ USB Browser)
You can replace the following fac-
tory installed images and anima-
tions with your own:
•
The wallpaper which appears
when "AUX" is selected as au-
dio source (the image is set to
a connector at the factory),
•
the screen saver,
•
the wallpaper which appears
if the radio is switched off and
the vehicle ignition is switched
on, and also the "Off Clock"
menu item in the "Clock Set-
tings" menu as described on
page 51. The image is set to an
analogue clock at the factory.
For your images and animations
to be displayed, they must be cre-
ated using the BMP fi le format.
For the images to be displayed
without distortion, they should
ideally have 270 x 96 pixels.
Animations consist of max. 20
BMP fi les that are automatical-
ly displayed in succession just
like single frames of a movie. All
Changing basic settings in the settings menu
BMP fi les of an animation must
be stored in a separate folder. No
other fi les may be stored in this
folder!
The images must be available as
a fi le on an MMC/SD card or USB
stick. The MMC/SD card must be
inserted or the USB stick must be
connected.
➔
Press the softkey
"SD Browser") if the imag-
es are available on an MMC/
SD card. Press the softkey
(next to "USB Browser") if the
images are available on a USB
stick.
The fi le browser opens.
You can select a BMP fi le or a
folder from the list as follows:
➔
On the rocker switch
or
➔
On the rocker switch
to change up to a higher-level
folder.
➔
On the rocker switch
to change down to a sub-
folder.
➔
Press the OK button
select the selected fi le or the
selected folder with the BMP
fi les of the animation.
The "PICTURE Download"
menu appears.
<
(next to
3
to scroll up or down.
3
3
A
;
, press
, press
, press
to
47