Automatically Searching For Stations - Blaupunkt Memphis MP66 Instrucciones De Manejo E Instalación

Operating the tuner
"Program Type" menu, the
tuner automatically searches
the next station broadcast-
ing this program type in the
selected direction. For this
purpose, the station must
be broadcasting the corre-
sponding PTY identifi cation
as RDS service.
•
If you activated the automat-
ic change to alternative fre-
quencies in the "RDS" menu,
the tuner searches for the
same station on a different
frequency.
•
If you selected the "PTY OFF"
option in the "PROG TYP"
menu and deactivated the
automatic change to alterna-
tive frequencies in the "RDS"
menu, you can manually ad-
just the tuner in increments
of 100 kHz.
As soon as a station has been
located, it is played. The station
name appears on the display after
a few seconds if the station pro-
vides this RDS information.
You can now store this station
(see page 25) or restart the man-
ual station seek tuning.
Automatically searching for
stations
➔
While the tuner display ap-
pears, press on
rocker switch
24
or on the
3
.
The tuner searches for the next
station in the current wave-
band in the selected direction.
The settings in the menus "Sen-
sitivity" (see page 29) and "Pro-
gram Type" (see page 29) are
incorporated.
As soon as a station is located,
the seek tuning stops and the lo-
cated station is played. The sta-
tion name appears on the display
after a few seconds if the station
provides this RDS information.
You can now store this station
(see the next section) or restart
the automatic station seek tuning.
Note:
If you press and hold
the rocker switch
matically seek tuning skips the
stations found until you release
the rocker switch again.
or on
3
, the auto-