EdilKamin LOGO Instalación Uso Y Mantenimiento página 30

n the same wa , ad ust the shutdown times. he program
is con rmed b pressing the
OK appears on the displa .
When con rming the Weekl program the da to which
the program is to appl must be selected
on; ues; Wed; hurs; Fri; Sat; Sun
Once ou have chosen the da b scrolling through them
with the and ke s, con rm b pressing
proceed with the settings of the programs in the same wa
as for the ail program , selecting whether or not to
enable a program for each da of the week and choosing
the number and times of interventions.
Should ou make a mistake whilst setting the programs
ou can e it without saving b pressing the
Saved will appear on the displa .
he ame ma var depending on the t pe of pellets
used, in addition to normal variabilit of the solid fuel
ame and regular cleaning of the combustion chamber
carried out automaticall b the stove.
he automatic cleaning process performed b the
stove does not replace the need for the user to vacuum the
stove when cold, prior to ignition).
Stoves are equipped with an electronic pellet detection
s stem.
he detection s stem is integrated into the electronic
control board, allowing the stove to monitor how man
kilos of pellets are left. his veri cation is implemented
at an point whilst the stove is in operation mode.
For correct s stem operation, it is important that the
following procedure is adhered with during the rst
ignition (that must be implemented b the E LER).
efore starting to use the pellet detection s stem, ou
must load and consume a full sack of pellets. his
allows for a brief running-in of the loading s stem.
ence, load kg of pellets.
hen press the reserve button once, thereb storing
the data into the memor that
From now on the displa will show the remaining pellets
as the decrease in kg ( ... ... ).
Each time pellets are reloaded ou must enter the quantit .
E.g. when loading kg, simpl press the pellet
load button to enter this into the memor . For other
quantities, or in the event of an error, ou can specif
the quantit using the pellet reserve menu as follows .
ress the E button for seconds to view the SE
ress or consecutivel to view .
on rm b pressing E
of pellets will be displa ed
(default is and can be changed using the
Should the hopper run out of pellets, the stove will
block and Stop Flame will appear (see page
ote Ever now and again remember to reset the "pellet
reserve warning" for it to function in a more reliable
manner.
For an clari cation please contact the authorised
E LER who performed the rst st ignition.
INSTRUCTIONS FOR USE
E button when Save
E and
ke and
kg have been loaded.
a E.
and the remaining quantit
that being loaded
- ke s).
).
GS.
- 30
-