Power Off - ECOVACS ROBOTICS DEEBOT M88 Manual De Instrucciones

5
Start
Press the AUTO Mode Button on DEEBOT or
on the Remote Control. DEEBOT starts to work
immediately in AUTO Cleaning Mode using the
default Programmed Cleaning Pattern.
* To choose another Cleaning Mode or Cleaning
Pattern, please refer to section 3.3 Cleaning
Pattern and Cleaning Mode Selection for
details.
6 Pause
Pause DEEBOT by pressing the AUTO Mode
Button on DEEBOT or the START/PAUSE Button
on the Remote Control.
* Press AUTO Mode Button on DEEBOT or
the START/PAUSE Button on the Remote
Control to restart.
* DEEBOT can be directed to move forward, backward, left and right using the Direction Control
Buttons on the Remote Control when it is Paused. DEEBOT cleans when it is directed to move
forward using the Remote Control.
* The AUTO Mode Button on the robot's Control Panel stops glowing after the robot is paused for
more than 5 minutes. Press AUTO Mode Button on the robot to wake up the robot, or press any
button on the Remote Control to start the robot immediately.

Power OFF

7
Pause DEEBOT. Move the Bottom Power Switch to
the OFF position.
* When DEEBOT is not cleaning, it is suggested
to keep it powered ON and charging.
3. Operating and Programming
OFF
11
EN