Cleaning, Maintenance And Repair; Service Addresses; Service Intervals; Disposal - NovoPress HPA400 Instrucciones De Uso

HPA400
Pos : 54 /RVT/R einigung, Wartung, R eparatur /01a - Vorsic ht - Einsc halter- ACO102, ACO152, AC O202XL, ACO401, AXI/AAP102 @ 0\mod_1390815867244_18.doc x @ 1770 @ 1 @ 1

10 Cleaning, maintenance and repair

EN
Pos : 55 /RVT/R einigung, Wartung, R eparatur /02 - Ser vic eans chrift - AC O102, AC O152, ACO/EC O202, ACO202XL, EC O301, AC O401, AFP/EF P202, AXI/AAP102 @ 0\mod_1391000010165_18.doc x @ 1790 @ @ 1

Service addresses

Novopress GmbH & Co. KG
Scharnhorststr. 1
41460 Neuss
Germany
You can find the addresses of authorised specialist workshops by contacting Novopress or at
www.novopress.de.
Pos : 56 /System/War tung/03a - Infor mation Wartung - H PA400 @ 3\mod_1470207926707_18.doc x @ 22372 @ @ 1

Service intervals

Service and repair work may only be carried out by Novopress or the authorised NOVOPRESS
specialist workshops.
Pos : 57 /System/War tung/HPA400 @ 3\mod_1470117524307_18.doc x @ 22229 @ @ 1
When dirty:
Every week:
Every month:
Pos : 58 /RVT/Entsorgung/01 - Vorsicht + Ü bersc hrift - all e @ 0\mod_1392977304612_18.doc x @ 1858 @ 1 @ 1
•

11 Disposal

Pos : 59 /RVT/Entsorgung/02 - Bedi enungsanleitung Akku + Ladeger ät - all e bis auf EC O301 @ 0\mod_1392977618930_18.doc x @ 1864 @ @ 1
•
The instructions in the operating instructions provided with the battery charger must be complied with
when disposing of rechargeable batteries and the charger.
Pos : 60 /RVT/Entsorgung/03 - dritter T eil - alle @ 0\mod_1392977709253_18.doc x @ 1870 @ @ 1
•
The product must not be disposed of as normal household waste.
Novopress recommends that disposal be carried out by authorised specialist companies.
Alternatively, waste devices can be returned directly to Novopress (or a specialist workshop) for
proper disposal.
Pos : 61 /RVT/Allgemeines /#### Seitenumbr uch #### @ 0\mod_1380200837280_0.doc x @ 885 @ @ 1
CAUTION!
Risk of injury during cleaning or repair work from inadvertently pressing
the On switch.
Therefore:
– Comply with the safety instructions and always remove the battery before
performing cleaning, servicing or repair work.
Information!
The next service deadline is indicated on the HPA400.
This service must be performed at least every 2 years.
Clean upper and lower tool sections.
Clean the entire press cylinder.
Inspect the upper and lower tool sections for damage.
Replace if necessary.
Inspect the tool for leakages and send off for repair if required.
CAUTION!
Groundwater hazard
The device contains hydraulic fluid.
Hydraulic fluids pose a hazard to groundwater. Uncontrolled drainage or improper
disposal is punishable by law.
Therefore:
– Dispose of the device in an environmentally responsible manner.
22