Pioneer PDK-5014 Manual De Instrucciones página 15

How to install
4
Attaching a panel to the stand once the bracket has been attached
2
1,3
1,3
1. Fix the holes on the protruding portion of the bracket
onto the left and right bolts attached to the display stand.
2. Using two hexagonal bored bolts (M8 x 20), fix the
bracket to the left and right sides of the display stand by
inserting and screwing in the bolts into the screw holes
located at the bottom of the protruding part of the bracket
and the screw holes of the display stand.
3. Screw the bolts of the protruding portion of the bracket
firmly into place.
Note: In order to ensure safe installation, always be sure
to alternately tighten each bolt two times or more
until they are firmly fixed in place.
[Adjusting the angle of the plasma display screen]
When you want the screen to be easier to see, you can
angle it forwards by altering the bracket attachment loca-
tions. (5°)
0°
Precaution:
To safely attach the brackets to the support columns, be
sure to always have two people do this task as shown in
the drawing.
5°
15
En
15