Tabla de contenido
Publicidad
q
q
Zigzag Stitch
Machine setting
Pattern:
#5
Stitch length:
2.5
Stitch width:
5
Foot:
A: Zigzag foot
Thread tension:
3–5
Simple zigzag stitching is widely used for overcasting,
sewing on buttons etc.
Adjust the stitch length to suit your sewing needs.
Overcasting
Machine setting
Pattern:
#5
Stitch length:
2.5
Stitch width:
5–6.5
Foot:
A: Zigzag foot or C: Overedge foot
Thread tension:
3–5
CAUTION:
Do not set the stitch width less than 5 when using
the overedge foot to prevent the needle from
hitting the wires on the foot.
Place the raw edge of the fabric next to the guide of the
foot and start sewing.
q Guide
Bartacking
Machine setting
Pattern:
#5
Stitch length:
0.5
Stitch width:
3–6
Foot:
A: Zigzag foot
Thread tension:
3–5
This is similar to a very short satin stitch, and is used to
reinforce points of strain such as corners, pockets and
straps of lingerie.
Sew four (4) to six (6) stitches.
q Bar tack
Multiple Zigzag Stitch
Machine setting
Pattern:
#4
Stitch length:
0.5–1.0
Stitch width:
5–6.5
Foot:
A: Zigzag foot
Thread tension:
2–6
This stitch is used to finish a raw edge on synthetics
and other fabrics that tend to pucker.
Place the fabric to leave a 5/8" (1.6 cm) allowance.
Trim the extra allowance after sewing.
It is also used for mending tears.
34
Publicidad
Tabla de contenido
