Using The Appliance - Clatronic BS 1233 Instrucciones De Servicio

5....-05-BS 1233
Overview of the Components
1 Cable
2 On/off switch
3 Vacuum power regulator
4 Carrying handle
5 Cable-winding key
6 Dust bag filling display
7 Hose connection
8 Vacuum hose
9 Handle for opening the dust bag
compartment
• Insert the connection head of the suction hose (8) into the hose connector (7)
until it locks in place. To do so, please press the buttons simultaneously. In order
to release the hose again, please press the buttons once more on the connec-
tion head.
• Keep the buttons pressed down and then pull out the hose.
• Telescopic Suction Tube:
• This makes it possible to adapt the height to your individual body size.
Release the connection by turning the small section of the suction tube in
the direction OEFFNEN (see plastic ring of the suction tube).
• Move the suction tube as required. To lock it in place, turn the thin section of
the suction tube in the direction SCHLIESSEN until it is clearly heard to lock
in place.
• Then assemble the floor nozzle (12) and/or the accessories.
1. Unwind the length of cable (1) you require.
2. Insert the mains plug into a correctly installed safety socket (230 V, 50 Hz) and
then switch the machine on using the on/off switch (2).
3. Set the vacuum power with the vacuum power regulator (3).
4. Vacuum at a steady speed. There is no need to exert pressure.
5. Attention: pay attention to the range that can be covered with the cable length.
Vacuum power regulator:
Low vacuum power:
Medium vacuum power:
High vacuum power:
02.07.2003 14:45 Uhr
Start-up
10 Dust bag compartment
11 Telescopic Suction Tube
12 Floor nozzle
13 Hook on the suction tube (not
14 Parking assistance (not shown)
Accessories:
"2-in-1" nozzle (groove and brush nozzle)

Using the Appliance

For curtains and delicate fabrics
For long-pile velour carpets and textile flooring
For sturdy rugs and floors
Seite 35
shown)
GB
35