Figure 4, Removing The Service Cover; Figure 5, Dust Chute Connection - Kemper Clean Air Tower Manual De Uso

Loosen the fiixng screws of the service cover (item 1) and remove it.
●
Please ensure that the attached grounding cable is not damaged.
Part no.: 150 2627 (CAT 2.0)
All rights over changes without prior notice and errors reserved.
KEMPER CleanAirTower 2.0 Operating instructions - EN

Figure 4, Removing the service cover

Figure 5, dust chute connection

- 61 - Rev.: 00
Issue: 02/2017