Changing The Main Filter; After Finishing Work - Festool CT 26 E HEPA Manual De Instrucciones Original

2
8
► Close the disposal bag.
► Remove the disposal bag.
► Dispose of the used disposal bag in accord­
ance with statutory regulations.
► Clean the dust container [2-3].
► Replace the top section [2-1] and close the
locking clips [2-2].

10.3 Changing the main filter

NOTE
Motor damage
► Never operate the extractor without a main
filter fitted as the motor may become dam­
aged.
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Turn the top section of the machine so that
the main filter is facing upwards (Fig.[9]).
► Fold over the lever [9-3] and remove the re­
tainer [9-2].
► Remove the used main filter [9-1] and re­
place with a new one.
► Dispose of the used main filter in accord­
ance with statutory regulations.
1
3
► Insert the retainer [9-2] and fold over the
lever [9-3] until it engages.
► Replace the top section [2-1] and close the
locking clips [2-2].
9
9-1
1
3
5

11 After finishing work

► Switch off the mobile dust extractor and
disconnect the plug.
► Wind up the mains power cable.
► Empty the dust container.
English
9-2
9-3
2
4
13