Adjusting The Volume; Setting The Power-On Volume - Blaupunkt Daytona Beach C34 Instrucciones De Manejo E Instalación

SWITCHING ON/OFF
Switching on by inserting a cassette
If the unit is off and there is no cassette
inserted in the drive,
➮
button 1.
press the
The control panel opens.
➮
Gently insert the cassette into the
cassette slot with the open side to
the right.
➮
Close the control panel.
The unit switches on and starts playing
the side that is facing upwards.
Note:
The unit will remain off if the
G
ignition is off. To turn it on, press
button 2 once.

ADJUSTING THE VOLUME

Adjusting the volume
The volume can be adjusted in steps
from 0 (mute) to 66 (maximum).
To increase the system volume,
➮
turn the volume control 3
clockwise.
To decrease the volume,
➮
turn the volume control 3 anti-
clockwise.

Setting the power-on volume

You can set the unit's default power-on
volume.
➮
Press the MENU button 8.
➮
Keep pressing the fi or % button
7 until "ON VOLUME" appears in
the display.
➮
Set the power-on volume using the
@ and # buttons 7.
To help you adjusting the volume more
easily, the audible volume level will
increase or decrease accordingly as you
make your changes.
If you select "LAST VOL", the volume
played before the unit was last switched
off will be reactivated.
Note:
To protect your hearing, the
G
maximum switch-on volume under
the "LAST VOL" setting is "38". If
the volume was higher before the
unit was switched off and "LAST
VOL" has been selected, the
volume will be set at "38" the next
time the radio is switched on.
9