Switching On/Off; Adjusting The Volume; Setting The Power-On Volume - Blaupunkt John Deere MP36 Instrucciones De Manejo

Switching on/off

Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off using button 1

To switch on the device, press button
1.
The device switches on.

To switch off the device, press and
hold down button 1 for longer than
two seconds.
The device switches off.
Switching on/off using the vehicle
ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle's ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing button 1.
Switching the device on/off using the
detachable control panel

Detach the control panel.
The devices switches off after the time set
in the "OFF TIMER" menu.

Attach the control panel again.
The device switches on. The last setting
(radio, CD, CD changer or AUX) is reacti-
vated.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.

Adjusting the volume

You can adjust the volume in increments
from 0 (off) to 66 (maximum).
To increase the volume,

turn the volume control 3 clockwise.
To decrease the volume,

turn the volume control 3 counter-
clockwise.

Setting the power-on volume

Note:
The device features a time-out function
(time window).
For example, if you press the MENU
button 9 and select a menu item,
the device switches back after approx.
8 seconds after the last button acti-
vation. The settings performed are
saved.
You can set the power-on volume.
 Press the MENU button 9.

Press the or button : repeat-
edly until "ON VOLUME" appears on the
display.
 Adjust the power-on volume with the
buttons :.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you enable "LAST VOL", the volume which
was set the last time you switched off the
device is re-enabled.
Volume
1