Switching On/Off; Adjusting The Volume; Setting The Power-On Volume - Blaupunkt Kingston MP47 Instrucciones De Manejo

Ocultar thumbs Ver también para Kingston MP47:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71

Switching on/off

Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off with the On/Off button
u
For switch-on, press the On/Off but-
ton 3.
The device switches on.
u
To switch off the device, press and hold
down the On/Off button 3 for longer
than two seconds.
The device switches off.
Switching on/off using the vehicle
ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle's ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing the On/Off button 3.
Switching the device off using the
detachable control panel
u
Detach the control panel.
The devices switches off after the time set
in the "OFF TIMER" menu.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.

Adjusting the volume

You can adjust the volume in increments
from 0 (off) to 66 (maximum).
To increase the volume,
u
turn the volume control 4 clockwise.
To decrease the volume,
turn the volume control 4 counter-
u
clockwise.

Setting the power-on volume

You can set the power-on volume.
u
Press the MENU/OK button ;.
u
Press the
or
edly until "ON VOLUME" appears on
the display.
u
button 9 to adjust a spe-
Press the
cifi c power-on volume, or the
9 to select the "LAST VOL" setting.
u
Set a specifi c power-on volume with
button <.
the
or
To help you adjust the setting more easily,
the device will increase or decrease the
volume as you make your changes.
If you enable "LAST VOL", the volume which
was set the last time you switched off the
device is re-enabled.
Note:
To protect your hearing, the power-on
volume is limited to the value "38" for
the setting "LAST VOL". If the volume
was higher before switch-off, the value
is automatically set to "38" at switch-
on. This prevents an unintentionally
and unexpectedly high volume when
switching on the device.
Volume
button < repeat-
button
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7 647 623 310

Tabla de contenido