Dremel 9100 Instrucciones De Funcionamiento página 17

DM 2610Z04970 10-13_9100 10/9/13 7:52 AM Page 17
Aluminum Oxide Abrasive Wheels
Use to remove paint, deburr metal, polish
stainless steel and other metals. Available in
medium grit. 1/8" shank.
Sanding Accessories
Sanding discs in fine, medium and coarse
grades are made to fit on a mandrel. They can
be used for nearly any small sanding job you
might have, from model making to fine furniture
finishing. In addition, there is the drum sander,
a tiny drum which fits into the Rotary Tool and
makes it possible to shape wood, smooth
fiberglass, sand inside curves and other difficult
places, and other sanding jobs. You replace the
sanding bands on the drum as they become
worn and lose their grit. Bands come in fine
medium and coarse grades. Flapwheels grind
and polish flat or contoured surfaces. They are
used most effectively as a finishing sander after
heavier surface sanding and material removal
is completed. Flapwheels come in fine and
coarse grades. Buffs are a great finishing
accessory for cleaning and light sanding. They
work effectively on metal, glass, wood,
aluminum and plastics. Coarse and medium
buffs are sold together. All buffs are sold
individually. Do not exceed 15,000 RPM in
speed. 1/8" shank.
Grinding Wheel
Use for deburring, removing rust, and general
purpose grinding. Use with Mandrel #402.
Cutting Wheels
These thin discs of emery or fiberglass are
used for slicing, cutting off and similar
operations. Use them for cutting off frozen bolt
heads and nuts, or to reslot a screw head
which has become so damaged that the
screwdriver won't work in it. Fine for cutting
BX cable, small rods, tubing, cable and cutting
rectangular holes in sheet metal.
17